For all enquiries please call:

AREAS OF USE

PROTECH Texture Finish can be used on primed external timber/masonry surfaces, typically used in the Portacabin, Park Home and Construction industry.  It can be used on almost any type of prepared surface.

OVERVIEW

PROTECH Texture Finish has a thick, cement like consistency.

It will give you years of protection, when applied and maintained correctly.

Our product contains the most up to date, effective and environmentally friendly mould and algae preventatives.  Laboratory tested against a large range of fungal, algae and spores.

It can be worked with while still wet to obtain a wide variety of designs, patterns and textures.

The coating is extremely effective for filling cracks that are bigger than hairline along with other irregularities on the substrate.

Our Texture Finish will not crack or graze during the movement of the substrate caused by normal expansion and contraction.

Unlike some Texture Finishes, PROTECH allows the substrate to breath whilst maintaining total water and weather protection.

With a range of 22 colours as standard  please refer to a live colour chart which can be obtained by filling out details on our contact us page or calling a member of our team.

We will be happy to work with you to supply a colour that isn't shown on our colour chart.  This is subject to minimum order and must be pre-arranged.

All coverings are available in a range of sizes to suit all needs i.e. 5 Litre, 10 Litre, 20 Litre, 200 Litre and 1000 Litre IBC's.

No mixing is required, it's all ready for you to use.

When it comes to the cleaning of the equipment it is as simple as rinsing with clean tap water whilst the coating is still wet.

You may  also consider over coating your Texture Finish with PROTECH Masonry Coat.

APPLICATION

Recommended application is by brush, trowel or rolled with a texture/patterned roller or “comb”, to achieve the required finish.

Coverage:      1 – 1.5 metre square per litre.

Recommended application thickness:      250 – 950 microns wet film.

Drying time at 20 degrees Celsius at 60% RH:

Surface dry:      6 – 12 hours

Thorough dry:      24 – 72 hours (Depending on application thickness).

Drying times are given only as a guide, as the drying can be greatly enhanced by warm weather.

Conversely drying times will be greatly impaired in wet damp weather, or where there is high humidity.

Do not apply in temperatures below 5 degree Celsius.

IMG 0046 opt

IMG 0044 2 opt

**

buckets opt

IMG 0079 opt 2

 

side