For all enquiries please call:
AREAS OF USE
For application to new untreated substrates, for interior and exterior use.
For application to any other new untreated wooden surfaces, for interior and exterior use.
For application to any masonry and concrete substrates.
For the effective blocking of various stains associated with plywood boards.
(PROTECH STAIN BLOCKING PRIMER)
Contains the most up to date, effective and environmentally friendly mould and algae resisters.
Laboratory tested against a large range of fungus, algae and spores.
Almost any type of top coat may be used, but primarily ProTech Texture Finish or Masonry Coat.
Will not crack or craze during the movement of the substrates caused by normal expansion and contraction.
ProTech Primers are supplied in five sizes to suit all needs i.e. 5 litre, 10 litre, 20 litre, 200 litre and 1000 litre IBC.
Ready to use (may need any surface water stirring in, caused by long storage).
Cleaning of equipment is as simple as rinsing equipment with clean tap water while still wet.
Supplied normally in white but can be manufactured in almost any other colour (subject to our minimum order restrictions).
Recommended application is by the use of a Long Pile Roller, but may be brushed (small areas only) or sprayed..
Coverage: 4 – 6 metre square per litre.
Surface dry: 2 – 6 hours.
Thorough dry: 24 hours.
Drying times are given only as a guide, as the atmospheric temperature and humidity will accelerate or retard the drying process.
Conversely drying times will be greatly impaired in wet, damp weather, or where there is high humidity.
Do NOT apply in temperatures below 5 degree Celsius.
Do NOT apply externally if there is a possibility of frost or heavy rain.